Welding Schools Near Me | How to Become a Welder – Danvers IL

How to Choose a Welder Training Program near Danvers Illinois

Danvers IL welding school studentFinding the right welding school near Danvers IL is an important first step to launching your new occupation as a professional welder. But since there are numerous schools to choose from, how do you know which ones to consider? And more importantly, once you have fine tuned your alternatives, how do you select the right one? Most people start by looking at the schools that are closest to their residences. Once they have located those that are within driving distance, they gravitate toward the least costly one. Yes, location and the cost of tuition are crucial concerns when examining welding trade schools, but they are not the only ones. Other concerns include such things as reputation, accreditation and job placement rates. So before beginning your search for a vocational school to become a welder, it’s sensible to develop a list of qualifications that your selected school must have. But before we explore our due diligence checklist, let’s cover a little bit about how to become a welder.

Welding Degree and Certificate Programs

Danvers IL welder working on pipingThere are a number of alternatives available to obtain training as a welder in a trade or vocational school. You can receive a diploma, a certificate or an Associate Degree. Bachelor Degrees are available in Welding Technology or Welding Engineering, but are more advanced programs than most journeyman welders will need. Some programs are also made available combined with an apprenticeship program. Following are short descriptions of the most typical welding programs offered in the Danvers IL.

  • Diploma and Certificate Programs are normally made available by trade and technical schools and require about one year to finish. They are more hands-on training in scope, fashioned mainly to develop welding skills. They can provide a good foundation for a new journeyman or apprentice welder, or supplemental skills for experienced welders.
  • Associate Degree Programs will take 2 years to finish and are most often offered by community colleges. An Associate Degree in Welding Technology furnishes a more well-rounded education than the diploma or certificate while still providing the foundation that prepares students to enter the workforce.

A number of states and municipalities do have licensing requirements for welders, therefore don’t forget to check for your location of potential employment. As needed, the welder school you choose should ready you for any licensing examinations that you will have to take in addition to supplying the suitable training to become a professional welder.

Welding Certification Choices

Danvers IL welder working on poleThere are a number of organizations that offer welding certifications, which test the knowledge and skill level of those applying. A large number of Danvers IL employers not only expect a degree or certificate from an accredited welding program, but also certification from a highly regarded agency like the American Welding Society (AWS). Different certifications are offered based on the type of work that the welder does. A few of the things that certification can attest to are the welder’s ability to

  • Work in compliance with specific codes
  • Work with specific metal thicknesses
  • Work with various types of welds
  • Perform in compliance with contract specifications

As earlier mentioned, many cities, states or local municipalities have licensing requirements for welders. Of those mandating licensing, some additionally require certification for different kinds of work. Certification is also a means to demonstrate to employers that you are an extremely skilled and experienced welder. So similarly as with licensing, look into the requirements for your location and make certain that the welding trade school you decide on preps you for certification if needed.

How to Pick a Welding Tech Program

Danvers IL welder working on carAs soon as you have decided on the credential you would like to obtain, a degree, certificate or diploma, you can begin to compare schools. As you probably know, there are many welding vocational and trade schools in the Danvers IL area. That’s why it’s important to decide in advance what qualifications your selected school must have. We have previously discussed 2 important ones that most people consider first, which are location and the cost of tuition. As stated, although they are very important qualifications, they are not the only ones that should be considered. After all, the school you choose is going to furnish the instruction that will be the foundation of your new career as a welder. So following are more factors you might want to consider before selecting a welder technical school.

Accreditation. It’s very important that the welder tech school you decide on is accredited by either a national or a regional agency. There are two standard types of accreditation. The school may attain Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a specific program the school has, such as Welding Technology. So make sure that the program you pick is accredited, not just the school alone. Additionally, the accreditation should be by a U.S. Department of Education acknowledged accrediting organization, like the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). Besides helping make sure that you obtain a superior education, the accreditation may also help in securing financial aid or student loans, which are often not available in Danvers IL for schools that are not accredited. Also, for those states or local governments that require licensing, they may require that the welding training program be accredited also.

Job Placement and Apprenticeship Programs. Many welding diploma or degree programs are provided in conjunction with an apprenticeship program. Some other schools will assist in placing you in a job or an apprenticeship after graduation. Ask if the schools you are looking at assist in placing students in apprenticeships or have a job assistance program. These schools should have partnerships with local unions and various metal working businesses to which they can place their students. Older schools may have a more substantial network of graduates that they can utilize for referrals. These programs can help students find employment and develop relationships within the Danvers IL welding community.

Job Placement and Completion Rates. The completion rate is the percentage of students that start an educational program and finish it. It’s crucial that the welding school you select has a higher completion rate. A lower rate may signify that the students who enrolled in the program were unhappy with the instruction, the instructors, or the facilities, and dropped out. The job placement rate is also an indication of the caliber of training. A high job placement rate will not only affirm that the program has a good reputation within the field, but also that it has the network of Danvers IL contacts to help students obtain employment or apprenticeships upon graduation.

Modern Facilities and Equipment. Once you have decreased your selection of welder schools to 2 or 3 options, you should consider going to the campuses to evaluate their facilities. Make sure that both the facilities and the equipment that you will be taught on are modern. In particular, the training equipment should be similar to what you will be using on the job. If you are uncertain what to look for, and are currently in an apprenticeship program, ask the master welder you are working under for guidance. Otherwise, ask a local Danvers IL welding contractor if they can give you some pointers.

School Location. Although we previously briefly talked about the significance of location, there are a couple of additional points that we should address. You should bear in mind that unless you have the ability to move, the welding school you select must be within commuting distance of your Danvers IL home. If you do choose to enroll in an out-of-state school, besides relocation expenses there might be higher tuition fees for out-of-state residents. This is especially true for welder degree programs offered by community colleges. Additionally, if the school provides an apprenticeship or job placement program, more than likely their placements are within the school’s local community. So the location of the school needs to be in an area or state where you subsequently will desire to work.

Smaller Classes. Personalized instruction is essential for a hands-on trade such as welding. It’s possible to be lost in bigger classes and not receive much individualized training. Find out what the typical class size is for the welder schools you are reviewing. Inquire if you can attend a couple of classes so that you can see how much personal attention the students are receiving. While there, speak with some of the students and get their opinions. Also, speak with some of the teachers and find out what their welding experience has been and what credentials and certifications they hold.

Convenient Class Scheduling. Some people learn a new profession while still working at their current job. Make sure that the class schedules for the schools you are reviewing are convenient enough to fulfill your needs. If you can only attend classes in the evenings or on weekends near Danvers IL, confirm that the schools you are assessing provide those alternatives. If you can only enroll on a part-time basis, make certain that the school you select offers part-time enrollment. Also, find out what the policy is to make up classes if you you miss any due to work, illness or family emergencies.

Will You Be Attending Welding School Near Danvers IL?

Perhaps you live in the Danvers Illinois area, or have decided to enroll in a Welding Program that has a campus near there.  In either case, you may find this bit of history both interesting and informative.

Danvers, Illinois

Danvers was laid out under the name of Concord on February 20, 1836 by Israel W. Hall (February 5, 1799 - January 3, 1865) and Matthew Robb (July 15, 1801 – February 24, 1870). The name Concord was given to the town by Hall after Concord, Massachusetts. A rival town, Wilkesborough, just over a mile to the east, was laid out by James O. Barnard on 3 June of the same year. Wilkesborough had 96 lots and a public square.[6] Both towns were part of the great town founding surge in Illinois that peaked in 1836. Between 1835 and 1837 eight new towns and many additions were laid out in McLean County. At this time it was fairly common for two towns to be founded close to each other as they competed for the same locational advantage. In this case both towns were on the stage route from Bloomington to Peoria and Pekin. For a several years it was unclear which town would be successful. Wilkesborough did quite well and by 1859 had 15 heads of family, but Concord had three times that number. Eventually it became clear that Concord would was the more successful place, but the people of Concord had to go to Wilkesborough to get their mail. By the late 1870s Wilksborough had completely vanished.[7]

Like many other new places laid out in the 1830s, the original plan of the new town was designed around a central public square. However, unlike most such places (for example, Lexington and LeRoy), the plat used at Concord showed with dashed lines how the streets which entered the public square midway along each side could be extended to meet at the center of the square. In effect, this unusual feature of the plan made it possible to subdivide the square into four smaller rectangles. This was soon done. One of these rectangles has always been a park, but the other three have been put to different civic uses, including locations for the library, fire station, water tower, and school gymnasium.[8]

The early growth of Danvers was extremely slow. Although both Hall and Robb lived in the area, neither was a resident of the town. The first building in Concord was erected in 1837 by Nicholas Conger, but Conger himself does not seem to have lived there. The first actual resident was Asa Rankin. Eventually a small mill was erected by Hobson and Havens. In the words of the 1879 county history, “For more than six years the place was nearly lifeless.”[9] In 1848 or 1849 a Post office was established in Concord.[10] Most of the early rural settlement around the new town was near Stout’s Grove, which began just west of Concord, and for the first twenty years of the town’s life the prairie to the north east and south was used mainly as open grazing land.

Online Welder Degree and Certificate Programs

pipe welder at work in Danvers ILWelding is very much a hands-on kind of vocation, and therefore not extremely suitable for training online. Even so, there are a small number of online welding classes offered by certain community colleges and trade schools in the greater Danvers IL area that can be credited toward a degree or certificate program. These classes mainly cover such topics as reading blueprints, safety,, and metallurgy. They can help give a beginner a basis to start their training and education. However, the most important point is that you can’t learn how to weld or use welding materials unless you actually do it. Obviously that can’t be performed online. These skills must be learned in an on-campus setting or in an apprenticeship. Online or distance learning is better suited for seasoned welders that want to advance their knowledge or perhaps attain a more advanced degree. So if you should find an online welding certificate or degree program, be extremely cautious and make certain that the greater part of the training is done on campus or in a workshop type of environment.

Pick the Right Welding Vocational Program Danvers IL

Selecting the best welder training program will undoubtedly be the most important decision you will make to begin your new career. As we have covered in this article, there are several things that you will need to evaluate and compare between the schools you are considering. It’s a necessity that any welder school that you are reviewing includes a lot of hands-on training. Classes should be smaller in size and each student must have their own welding machine to train with. Classroom instruction needs to provide a real-world perspective, and the course of study should be up-to-date and in-line with industry standards. Courses vary in duration and the type of credential offered, so you will need to ascertain what length of program and degree or certificate will best satisfy your needs. Each program provides unique possibilities for certification as well. Perhaps the best means to research your final list of schools is to check out each campus and talk with the teachers and students. Take the time to attend some classes. Tour the campus and facilities. Make certain that you are confident that the school you choose is the best one for you. With the right training, hard work and commitment, the final outcome will be a new trade as a professional welder in Danvers IL.

 

The location could not be found.

 

Business Results 1 - 10 of 1

Heritage Machine & Welding
1 Reviews
Metal Fabricators
Phone:
1001 W Locust St, Bloomington, IL 61701